Cart summary

You have no items in your shopping cart.

EXOSC3 Antibody

Catalog Number: orb865391

Select Product Size
SizePriceQuantity
100 μg$ 500.00
100 μg Enquire
DispatchUsually dispatched within 2-4 weeks
Product Properties
Catalog Numberorb865391
CategoryAntibodies
DescriptionAnti-EXOSC3 Antibody. Tested in ELISA, Flow Cytometry, IF, IHC, ICC, WB applications. This antibody reacts with Human, Mouse.
ClonalityPolyclonal
Species/HostRabbit
IsotypeRabbit IgG
ConjugationUnconjugated
ReactivityHuman, Mouse
Form/AppearanceLyophilized
ConcentrationAdding 0.2 ml of distilled water will yield a concentration of 500 μg/ml.
PurificationImmunogen affinity purified.
ImmunogenE.coli-derived human EXOSC3 recombinant protein (Position: R64-S275).
UniProt IDQ9NQT5
MW30 kDa
Tested applicationsELISA, FC, ICC, IF, IHC, WB
Application notesWestern blot, 0.25-0.5 μg/ml, Human, Mouse Immunohistochemistry(Paraffin-embedded Section), 2-5 μg/ml, Human Immunocytochemistry/Immunofluorescence, 5 μg/ml, Human Flow Cytometry (Fixed), 1-3 μg/1x106 cells, Human ELISA, 0.1-0.5 μg/ml, -. Adding 0.2 ml of distilled water will yield a concentration of 500 μg/ml
Cross ReactivityNo cross-reactivity with other proteins.
Antibody TypePrimary Antibody
StorageMaintain refrigerated at 2-8°C for up to 2 weeks. For long term storage store at -20°C in small aliquots to prevent freeze-thaw cycles.
Alternative namesProstaglandin E synthase 3; Cytosolic prostaglandi
Read more...
NoteFor research use only
Expiration Date12 months from date of receipt.
Images
EXOSC3 Antibody

Flow Cytometry analysis of PC-3 cells using anti-EXOSC3 antibody. Overlay histogram showing PC-3 cells (Blue line). To facilitate intracellular staining, cells were fixed with 4% paraformaldehyde and permeabilized with permeabilization buffer. The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-EXOSC3 Antibody (1 µg/1x10^6 cells) for 30 min at 20°C. DyLight®488 conjugated goat anti-rabbit IgG (5-10 µg/1x10^6 cells) was used as secondary antibody for 30 minutes at 20°C. Isotype control antibody (Green line) was rabbit IgG (1 µg/1x10^6) used under the same conditions. Unlabelled sample without incubation with primary antibody and secondary antibody (Red line) was used as a blank control.

EXOSC3 Antibody

IF analysis of EXOSC3 using anti-EXOSC3 antibody. EXOSC3 was detected in an immunocytochemical section of A431 cells. Enzyme antigen retrieval was performed using IHC enzyme antigen retrieval reagent for 15 mins. The cells were blocked with 10% goat serum. And then incubated with 5 µg/mL rabbit anti-EXOSC3 Antibody overnight at 4°C. DyLight®488 Conjugated Goat Anti-Rabbit IgG was used as secondary antibody at 1:100 dilution and incubated for 30 minutes at 37°C. The section was counterstained with DAPI. Visualize using a fluorescence microscope and filter sets appropriate for the label used.

EXOSC3 Antibody

IHC analysis of EXOSC3 using anti-EXOSC3 antibody. EXOSC3 was detected in a paraffin-embedded section of human gall bladder adenosquamous carcinoma tissue. Heat mediated antigen retrieval was performed in EDTA buffer (pH8.0, epitope retrieval solution). The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 2 µg/ml rabbit anti-EXOSC3 Antibody overnight at 4°C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37°C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC) with DAB as the chromogen.

EXOSC3 Antibody

IHC analysis of EXOSC3 using anti-EXOSC3 antibody. EXOSC3 was detected in a paraffin-embedded section of human lung cancer tissue. Heat mediated antigen retrieval was performed in EDTA buffer (pH8.0, epitope retrieval solution). The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 2 µg/ml rabbit anti-EXOSC3 Antibody overnight at 4°C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37°C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC) with DAB as the chromogen.

EXOSC3 Antibody

IHC analysis of EXOSC3 using anti-EXOSC3 antibody. EXOSC3 was detected in a paraffin-embedded section of human renal clear cell carcinoma tissue. Heat mediated antigen retrieval was performed in EDTA buffer (pH8.0, epitope retrieval solution). The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 2 µg/ml rabbit anti-EXOSC3 Antibody overnight at 4°C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37°C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC) with DAB as the chromogen.

EXOSC3 Antibody

IHC analysis of EXOSC3 using anti-EXOSC3 antibody. EXOSC3 was detected in a paraffin-embedded section of human thyroid carcinoma tissue. Heat mediated antigen retrieval was performed in EDTA buffer (pH8.0, epitope retrieval solution). The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 2 µg/ml rabbit anti-EXOSC3 Antibody overnight at 4°C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37°C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC) with DAB as the chromogen.

EXOSC3 Antibody

Western blot analysis of EXOSC3 using anti-EXOSC3 antibody. Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30 ug of sample under reducing conditions. Lane 1: human Hela whole cell lysates, Lane 2: human HEK293 whole cell lysates, Lane 3: mouse RAW264.7 whole cell lysates. After electrophoresis, proteins were transferred to a nitrocellulose membrane at 150 mA for 50-90 minutes. Blocked the membrane with 5% non-fat milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-EXOSC3 antigen affinity purified polyclonal antibody at 0.5 µg/mL overnight at 4°C, then washed with TBS-0.1% Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit with Tanon 5200 system. A specific band was detected for EXOSC3 at approximately 30 kDa. The expected band size for EXOSC3 is at 30 kDa.

Similar Products
  • EXOSC3 Antibody [orb626854]

    ELISA,  IHC,  IP,  WB

    Human, Mouse, Rat

    Rabbit

    Polyclonal

    Unconjugated

    100 μg, 50 μg
  • EXOSC3 Rabbit Polyclonal Antibody [orb324839]

    IHC,  WB

    Bovine, Canine, Equine, Guinea pig, Mouse, Rabbit, Rat

    Human

    Rabbit

    Polyclonal

    Unconjugated

    100 μl
  • EXOSC3 Rabbit Polyclonal Antibody [orb324904]

    IHC,  WB

    Bovine, Canine, Equine, Guinea pig, Mouse, Porcine, Rabbit, Rat

    Human

    Rabbit

    Polyclonal

    Unconjugated

    100 μl
  • EXOSC3 Antibody [orb1321834]

    WB

    Human, Mouse, Rat

    Mouse

    Monoclonal

    Unconjugated

    100 μl
  • EXOSC3 Antibody [orb1321835]

    FC,  WB

    Human, Mouse, Rat

    Mouse

    Monoclonal

    Unconjugated

    100 μl
Reviews

EXOSC3 Antibody (orb865391)

  • Star
  • Star
  • Star
  • Star
  • Star
  • 0.0
Based on 0 reviews

Participating in our Biorbyt product reviews program enables you to support fellow scientists by sharing your firsthand experience with our products.

Login to Submit a Review

No reviews yet