20X Sspe Buffer

• Catalog Number: orb348564
• Category: Tools
• Description: 20X Sspe Buffer
• Concentration: 20X
• Form/Appearance: Liquid (sterile filtered)
• Purity: This product was aseptically filtered through a Millipore 0.22 micron filter into clean, pre-sterilized containers. The product was tested on trypticase soy agar for 24 hours, 48 hours and 72 hours and was found to be negative for bacteria.
• Conjugation: Unconjugated
• Hazard Information: Non-Toxic
• Storage: Store container at room temperature (18° to 26° C) prior to opening. If desired, the solution may be stored at 4° C or less. Some salts may precipitate out of solution at lower temperature. Allow buffer to equilibrate to room temperature (18° to 26° C) to restore solubility of some salts.
• Buffer/Preservatives: Preservative: None. Stabilizer: None. See application note.
• Alternative names: 20X SSPE Buffer pH 7.4, Saline-Sodium Phosphate-ED
• Note: For research use only
• Application notes: This product is a concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. This buffer consists of 3.0 M Sodium Chloride, 0.2 M Sodium Hydrogen Phosphate, 0.02 M EDTA at a pH of 7.4. Meticulously prepared using ultra pure reagents dissolved in highly polished pharmaceutical grade deionized water treated with diethyl pyrocarbonate (DEPC).
• Expiration Date: 12 months from date of receipt.